User Manual VAS 5054A V1.06 All rights reserved.
Page 27
VAS 5054A User Manual
Buzzer Time sec.
The value you enter in this box defines the time after which
the alarm is sounded if the connection to the application PC
is interrupted (USB cable disconnected or Bluetooth
connection closed). A Bluetooth connection is also
interrupted when the diagnostic application is in the startup
screen.
The minimum timeout is 15 seconds, the maximum timeout
65535 seconds.
Timer Parameter/
Power Off Time
The VAS 5054A features a standby mode which ensures
load reduction for the vehicle battery during downtimes. The
device will be powered off automatically after a user-
selectable time.
While in standby mode, the current consumption is typically
5 mA at 12V. The device switches on again when the ignition
signal state changes from 0V to the positive vehicle voltage
(e.g. 12 V).
Power Off Time Enable /
Disable
Select this check box to activate auto power off.
Power Off Time sec.
The value you enter in this box defines the time after which
the device powers off if the connection to the application PC
is interrupted (USB cable disconnected or Bluetooth
connection closed). A Bluetooth connection is also
interrupted when the diagnostic application is in the startup
screen.
The minimum timeout is 15 seconds, the maximum timeout
65535 seconds.
Bluetooth Parameter
PIN
Input box for the PIN.
The PIN protects Bluetooth devices from unauthorized
access. According to Volkswagen specifications, the PIN has
to have at least 6 digits containing letters, numbers and
special characters. The maximum PIN length is 16
characters.
When you change the PIN, you have to enter the new PIN in
your Bluetooth software as well. The Bluetooth software will
prompt you for the new PIN when you establish a connection.
Local Name
Input box for the device name.
When you click into this box, the original device name is
cleared. Enter a new name. The serial number of the
VAS 5054A is automatically appended, enclosed in angle
brackets.
This name is displayed by your Bluetooth software when you
search for Bluetooth devices.
After changing the device name, you have to re-enter the PIN
in the Bluetooth software.
