♦ On-board network manager not active
♦ No crash switch-off
♦ No event memory entries blocking start procedure
2.3
Rules for cleanliness when working on
auxiliary/supplementary heater and fuel
system
♦ Thoroughly clean all connections and adjacent areas before
disconnecting.
♦ Place parts that have been removed on a clean surface (use
sheeting or paper, no cloths containing lint) and cover.
♦ If repair work cannot be performed immediately, carefully cov‐
er or seal opened components.
♦ Only install clean parts:
– Remove replacement parts from their packages only immedi‐
ately before installing them.
– Do not use any parts which have not been stored in their pack‐
aging (e.g. in a tool box).
♦ If fuel line has been opened:
– Do not work with compressed air.
– Do not move the vehicle.
– Do not start engine.
– Do not switch auxiliary heater on.
Transporter 2016 ➤
Auxiliary heater - Edition 04.2020
2. General information
5
