– Remove combustion air blower - V6- (combination blower)
-2- and seal -3- from heat exchanger -4-.
Installing
Install in reverse order of removal, observing the following:
Note
When installing the combustion air blower - V6- , always renew the seal -3-.
– Place combustion air blower - V6- -2- with new seal -3- on heat
exchanger -4-.
– Tighten bolts -1- in diagonal sequence
– Perform a functional check after completing all work on the
heater unit.
Specified torques
Component
Specified torque
Bolts -1- on combustion chamber
4 Nm
Transporter 2016 ➤
Auxiliary heater - Edition 04.2020
56
Rep. gr.82 - Supplementary heating
