7.8
Removing and installing heater in hous‐
ing
Removing
Note
Remove housing cover -2- for all repair work on heater units.
– Release both locking tabs -1-.
– Lift up housing cover -2- slightly in direction of -arrow A-.
– Remove housing cover -2- forwards in direction of -arrow B-
from plastic housing.
– Release clips -3-.
– Remove side cover -4- in direction of arrow -C- from plastic
housing.
– Remove wiring harness with grommet -5- from fastener in
plastic housing.
– Remove flange seal -6- from heater.
Transporter 2016 ➤
Auxiliary heater - Edition 04.2020
7. Auxiliary air heater
47
