CONDEXA PRO
22
If after having pressed “
MODE
” no change is made for 10 seconds (because the desired value is already set), the ope-
ration of the board returns to Display mode.
If after having pressed “
+
” or “
-
” no other button is pressed for at least one minute, Display mode resumes. If this hap-
pens, the new value is not saved.
Procedure
Display
3
Press “
MODE
”
4
Press “
-
” to change the set point to the desired value. E.g.: 40°C.
5
Press “
MEMO
” to save the new value
6
After 3 seconds Display mode resumes, with the new value set.
MONITOR MODE
Press “
MODE
” for 5 seconds to access "Monitor" mode. This mode is used to check the operating values of each indi-
vidual unit in the system (addresses from 1 to 60).
Operation
Display
1
The boiler is operating with the high temperature circuit at 80°C
2
Press “
MODE
” for 5 seconds. The display indicates that the values
and the operating status of unit 1 can be read.
3
Press “
+
” or “
-
” to scroll and read the values for the desired unit.
4
Pressing “
SEL
” on the display shows the 1st value for the selected unit.
Pressing the "
SEL
" button again displays the following values.
E.g. outlet temperature 70°C
5
To exit Monitor mode, press “
MODE
”.
If within 5 minutes no button is pressed or no operation is performed,
Display mode resumes.
Value
Display
1
Outlet temperature E.g.: 70°C
2
Return temperature E.g.: 50°C
3
Flue gas temperature E.g.: 60°C
4
Ionisation current (index from 0 to 99)
E.g.: ionisation current index 44
Press “
SEL
” to display the subsequent values for the individual unit:
Содержание CONDEXA PRO 100 S
Страница 72: ...CONDEXA PRO 72...
Страница 73: ...CONDEXA PRO 73...
Страница 74: ...CONDEXA PRO 74...
Страница 75: ...CONDEXA PRO 75...