CONDEXA PRO
21
To exit the display of the values, press the
"MEMO"
button.
If no operation is performed for 5 minutes, the board automatically returns to Display mode.
Value displayed
Display
8
Operating status of the mixing valve
E.g.: closing, opening, standby
9
Operating status of the main pump
E.g.: pump not working, pump working
10
Operating status of the DHW pump
E.g.: pump not working, pump working
11
Operating status of the secondary pump
E.g.: pump not working, pump working
SETTING THE USER PARAMETERS
Pressing "
SEL
" displays the following values in sequence:
- Outlet temperature T1 in the high temperature circuit
- DHW temperature T3
- Outlet temperature in the second circuit or low temperature circuit T6.
To change the corresponding set points:
- Press "
MODE
", the corresponding value will be displayed and the two digits on the right will flash.
- If the value does not need to be changed, press "
MODE
" again to return to Display mode.
- If the value needs to be changed, press "
+
" or "
-
" until reaching the desired value. Press "
MEMO
" to save the new value.
The value displayed will stop flashing and the display will return to Display mode.
Procedure
Display
1
E.g.: Value read on the display in the high temperature circuit 80°C
2
Press "
SEL
" to access Readout mode, press the button again
and scroll the first digit to 6 so as to display the set value, E.g.: 50°C
Example: changing the set point in the low temperature circuit from 50°C to 40°C
Содержание CONDEXA PRO 100 S
Страница 72: ...CONDEXA PRO 72...
Страница 73: ...CONDEXA PRO 73...
Страница 74: ...CONDEXA PRO 74...
Страница 75: ...CONDEXA PRO 75...