Voith 22000106810, Инструкция по установке и эксплуатации

Страница: 20 / 47

Instal
la
tion
and
Op
er
at
ing M
a
nual
/
Ver
si
o
n 1.
5/
91800271810, Protection
Class
EN
/ Pr
ot
ecti
on
C
lass
0: Off
en
(p
u
b
lic
)/ 2
0
14
-09-
03
20
WSR-D80112-S
Installation
5.2 Mounting
DANGER
 Any work on the way valve may only be performed in de-energized condition
and with the oil supply system switched off. During installation, the oil and
power supply for the way valve has to be secured against unintentional
switching-on.
WARNING
 During mounting, always secure the way valve against tilting, swinging, or
falling down!
CAUTION
 Wear safety goggles when mounting the way valve.
NOTICE
 Mount the way valve in accordance with the permissible installation position
described in Chapter 2.
Flange on the way valve to a hydraulic consumer via the connecting bores
being at the way valve bottom. Use O-rings to the flange surface for sealing.
For position and dimensions of the connecting bores, please see Chapter 10.
Mounting procedure

Unpack and transport the way valve (see Chapter 3).

Transport the way valve as described in Chapter 3.

Observe the installation position (see Chapter 2).

Remove the plug.

Position the way valve on the suitable wiring diagram. Use O-rings on the way
valve for sealing. The customer's connecting surface has to correspond to Ra ≤
1.6µm and Rmax ≤ 6.3µm.

Tighten the fastening bolts. (Observe the tightening torque!)
NOTICE
 When mounting ensure that the flange surfaces are clean and the sealing
rings are at their proper position.