VOCARE vitals360, Руководство пользователя

Страница: 90 / 117

Instructions for Use Page 90 of 117
13 CLEANING & DISINFECTING
13.1 The Difference between Cleaning & Disinfecting
Cleaning and disinfecting the device is a two-step process.
The first step is the Cleaning.
•
Cleaning removes any liquids, dust or dirt from the device.
•
Cleaning must be done before Disinfecting.
The second step is Disinfecting.
•
Disinfecting removes most, but NOT all possible infectious agents (bacteria or viruses) from
the device, including blood borne pathogens.
13.2 Safety Information
WARNINGS
•
Failure to follow these instructions will damage the device and prevent it from working properly.
•
DO NOT use hot steam or ultraviolet radiation for disinfection. Otherwise, the device may be
damaged or age prematurely.
•
DO NOT disinfect the device using high-temperature and/or high-pressure disinfecting gas.
•
NEVER use autoclaving, ETO or formaldehyde for disinfection.
•
DO NOT immerse or soak any part of the device in any liquid.
•
Be sure to fully shut down the device and disconnect all power cables from the outlets before
cleaning the device.
•
DO NOT spray anything onto the device.
•
DO NOT pour the liquid onto the device.
•
DO NOT allow any liquid to seep into the device during cleaning.
•
DO NOT get any moisture in slots or openings.
CAUTION
•
DO NOT clean or disinfect the device while using.
•
DO NOT clean the device with any strong dissolving agent such as acetone or other volatile
solutions.
•
DO NOT clean the device with corrosive cleaners.
•
NEVER use abrasive materials (such as steel wool or silver polish) to clean the device.
•
The SpO2 Light Tube and the Lens of the Temperature Probe may be scratched if it is cleaned
with tissue paper, resulting in inaccurate readings.
•
During the cleaning process, DO NOT touch the SpO2 Light Tube and the Lens of the
Temperature Probe with any potentially abrasive material.
•
The SpO2 Light Tube and the Lens of the Temperature Prober are the most delicate part of the
device. Use extreme care when cleaning the lens to avoid damage.
•
Keep water off the SpO2 Light Tube and the Lens of the Temperature Prober during the