VOCARE vitals360, Руководство пользователя

Страница: 63 / 117

Instructions for Use Page 63 of 117
4. When the finger is inserted into the device it will measure and display SpO2 and pulse rate real-time
results. The device will beep when measurement starts and finishes.
5. Measurements will be obtained and displayed in approximately 30 Seconds.
6. Remove the finger from the SpO2 door.
CAUTION
•
Clean the rubber touching the finger probe inside of the SpO2 door, and the test finger probe
before and after each measurement.
•
DO NOT pour or spray liquids onto the SpO2 door, and DO NOT allow any liquid to enter any
openings in the device. Make sure the device thoroughly dry prior to each use.
•
Always stay calm and quiet for approximately 4 to 5 Minutes before taking measurements.
•
Sit down and keep your back straight and your feet flat on the floor. Please be sure your legs
are NOT crossed.
•
The index finger, middle finger, or ring finger are suitable for the SpO2 door.
•
Relax and stay in a natural posture when taking measurements.
•
Keep your test hand still during the measurement.
•
DO NOT move your body or arms.
•
DO NOT speak or talk.
•
Keep the device on a fixed and stable table to ensure that it will NOT move during the test.