VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Руководство по установке

Страница: 106 / 276

9 (Optional) Select the database options.
n
If the system DSN you specify points to an existing Update Manager database with the current
schema, you can either retain your existing database or replace it with an empty one.
n
If the system DSN you specify points to an existing Update Manager database with different
schema, on the Database Upgrade page, select Yes, I want to upgrade my Update Manager
database and I have taken a backup of the existing Update Manager database, and click Next.
10 From the drop-down menu, select the IP address or the host name of your Update Manager instance.
If the computer on which you install Update Manager has one NIC, the Update Manager installer
automatically detects the IP address. If the computer has multiple NICs, you must select the correct IP
address or use a DNS name. The DNS name must be resolved from all hosts that this Update Manager
instance will manage.
11 Specify the Update Manager port settings, select whether you want to configure the proxy settings, and
click Next.
N
OTE
Use caution when you specify the Update Manager port settings, as you cannot modify them
after installation.
For the SOAP port, you have no limitations to the range of ports used, as long as there are no conflicts.
For the Server port, you can use the following range: 80, 9000-9100. Update Manager automatically
opens ESX/ESXi firewall ports in this range to allow outbound HTTP traffic to the patch store.
12 (Optional) Provide information about the proxy server, the port, and whether the proxy should be
authenticated, and click Next.
13 Select the Update Manager installation and patch download directories, and click Next.
If you do not want to use the default locations, you can click Change to browse to a different directory.
14 (Optional) In the warning message about the disk free space, click OK.
This message appears when you try to install Update Manager on a computer that has less than 120GB
free space.
15 Click Install to begin the installation.
16 Click Finish.
The Update Manager server component is installed, and the client component appears as an available plug-
in in the Plug-in Manager of the vSphere Client.
What to do next
In the vSphere Client, select Plug-ins > Manage Plug-ins to install and enable the Update Manager Client
plug-in.
Install or Upgrade vSphere ESXi Dump Collector
You can configure ESXi to dump the vmkernel memory to a network server, rather than to a disk, when the
system has encountered a critical failure. Install vSphere ESXi Dump Collector to collect such memory
dumps over the network.
If an earlier version of the vSphere ESXi Dump Collector is installed on your system, this procedure
upgrades the vSphere ESXi Dump Collector to the current version.
N
OTE
In the vCenter Server Appliance, the vSphere ESXi Dump Collector is installed and enabled by
default. These instructions apply to Windows-based deployments.
vSphere Installation and Setup
106 VMware, Inc.