Vmar Challenger 40ARF Trainer, Руководство по сборке и эксплуатации

Страница: 6 / 32

6
VMAR CHALLENGER 40ARF TRAINER
TM
R R R R R
STEP 1.10 CHECK OFF TOOLS AND
SHOP MATERIALS NEEDED.
R R
R R R
STEP 1.11 CHECK OFF OTHER ITEMS
NEEDED TO COMPLETE CHALLENGER.
R R
R R R
STEP 1.12 CHECK OFF OPTIONAL
EQUIPMENT AND ACCESSORIES.
These items are not included and are required to complete
and operate your Challenger and most other remote
control aircraft. For specific recommendations and part
numbers please see the attached listing of items available
in your market area.
R R
R R
R
Medium fuel tubing appropriate for your choice of
engine and fuel. 500-750 mm (24-36 in.)
R R R R R
Liquid thread locker.
R R
R R R
RC FM radio with at least four channels of control
and on a frequency appropriate for your market area.
R R
R R
R
Four servo's compatible with the RC FM radio.
Servos are generally sold with new radio systems.
R R
R R
R
External switch actuator appropriate for your radio
system (optional).
R R
R R
R
Engine and muffler suitable for use in a remote
control model aircraft. A two stroke glow fuel .40-.53
cubic inch engine is recommended.
R R
R R R
Propeller suitable for the engine. See the engine
instruction manual for recommended diameter and
pitch.
R R R R R
Engine glow plug
R R
R R
R
Engine glow plug ignitor
R R R R R
Engine 4 way wrench
R R
R R
R
Fuel for the engine.
R R
R R R
"After Run" oil for engine.
R R R R R
RC foam sheeting for wrapping radio receiver and
battery pack.
These tools & shop materials are not included and are
required to complete & operate your Challenger and most
other remote control aircraft. For some specific recom-
mendations & part numbers please see the attached
listing of tools & materials available in your market area.
These items are not included and are not required but
make the operation of your Challenger and most other
remote control aircraft easier & more enjoyable. For some
specific recommendations and part numbers please see
the separate listing of Accessories, Options & Spare Parts
available in your market area.
R R
R R R
Power Tote Deluxe field box #VMA-PT109D
R R R R R
Fuel pump and connecting tubing
R R R R R
Fueling valve
R R
R R
R
Chicken stick or electric starter
R R
R R R
Battery to power electric starter
R R R R R
Battery charger
R R R R R
Power panel to manage starter and pump if
electric.
R R
R R R
VMAR Model Engine Test Stand #VMA-ETS120.
R R R R R
Extra propellers
R R R R R
Extra glow plugs
R R
R R
R
Misc tools
R R
R R
R
1/4 - 20NC tap
R R
R R
R
Stick on weights
R R R R R
Clean and flat table or work surface approximately
600 x 1800 mm (24 x 72 in.)
R R R R R
2.5 mm ball socket screwdriver or Allen wrench
R R
R R
R
3.0 mm ball socket screwdriver or Allen wrench
R R R R R
4.0 mm ball socket screwdriver or Allen wrench
R R
R R
R
Phillips (cross head) screwdriver small size
R R R R R
Phillips (cross head) screwdriver medium size
R R
R R
R
Flat blade screwdriver medium size
R R R R R
Heat gun for covering (optional for covering touch
up)
R R R R R
30 Minute Epoxy and 240 grit sandpaper.
R R
R R
R
Epoxy mixing dishes, brushes and sticks
R R R R R
Scissors
R R
R R
R
Masking tape
R R R R R
Ruler or tape measure
R R
R R
R
Side ("wire") cutters
R R R R R
Flat file (optional)
R R
R R
R
Pencil
R R R R R
Ball point pen
R R
R R
R
Pliers
R R R R R
Hobby knife with #11 blade
R R
R R
R
Thin cyanoacrylate CA instant glue.
R R R R R
Silicone based sealant
R R
R R
R
Crescent wrench (optional)
R R R R R
Paper towels
R R
R R
R
Rubbing alcohol
TM