Vmar Challenger 40ARF Trainer, Руководство по сборке и эксплуатации

Страница: 13 / 32

13
VMAR CHALLENGER 40ARF TRAINER
TM
R R R R R
2.6.6 Connect the
clevises on the aileron
control rods to the aileron
servo arm.
R R R R R
2.6.7 Connect the
clevises on the other end
of the aileron control rods
to the aileron control
horns.
R R R R R
2.6.8 Remove the masking tape holding the ailerons.
R R
R R
R
2.6.9 Turn on your radio and activate the ailerons
using the aileron stick and ensure a smooth full motion
can be achieved.
R R
R R
R
2.6.10 With the wing top side up and viewed from the
back, ensure that moving the transmitter aileron stick to
the left raises the left aileron and lowers the right aileron.
Movement of the stick to the left will roll the aircraft to the
left (counter clockwise roll of the wing when viewed from
the back).
R R
R R R
2.6.11 With the wing top side up and viewed from the
back ensure that moving the transmitter aileron stick to
the right raises the right aileron and lowers the left
aileron. Movement of the stick to the right will roll the
aircraft to the right (clockwise roll of the wing when
viewed from the back).
R R R R R
2.6.12 If when doing the tests noted in 2.6.10 and
2.6.11 the direction of aileron deployment is incorrect,
consult your radio manual for how to reverse the direction
of rotation of your servo. Control surface movement and
alignment will be checked again during final setup but it is
a good idea to set things up properly as you go along with
the assembly of your kit.
AILERON CONTROL
RODS
LEADING EDGE
TRAILING EDGE
AILERON
CONTROL
HORN
SERVO
SERVO
ARM
CLEVIS
CLEVIS
LEADING EDGE
TRAILING EDGE
AILERON
CONTROL
HORN
CLEVIS
CLEVIS
SERVO
NOTES
TM
This space left intentionally blank