5
VMAR CHALLENGER 40ARF TRAINER
TM
R
R
R
R
R
Universal adjustable servo tray
[ST]
R
R
R
R
R
2 black plastic adjustable slider plates
,
1 long
[STDS]
,
1 short
[STSS]
, for mounting the servos
R
R
R
R
R
9 small screws
[STMS].
5 for mounting
the adjustment plates & 4
to mount the universal
servo tray to the fuselage.
R
R
R
R
R
1 Allen wrench
[AW]
for the screw in the pre-
installed EZ connectors
R
R
R
R
R
Yellow patch sheet
R
R
R
R
R
White patch sheet
R
R
R
R
R
Assembly and Operations Manual
R
R
R
R
R
"READ ME FIRST" pamphlet
R
R
R
R
R
Listing of Accessories, Options & Spare Parts
R
2 Ultralight treaded wheels 62 mm (2-7/16 in.) diameter
[W]
R
R
R
R
R
4 Wheel collars
[COL]
with set screws
R
R
R
R
R
4 Sheet metal screws
[MGMS]
approx 15mm (5/8 in.)
long
R
R
R
R
R
2 Landing gear
straps
[MGRS]
,
approx 9 mm x 21
mm
(3/8 x 7/8 in.) made
of white plastic with
a hole at each end.
R
R
R
R
R
2 Pre-bent main
landing gear wires
[MG]
approx 275
mm (11 in.) long
R
R
R
R
R
STEP 1.5 - CHECK OFF CONTENTS OF
THE MAIN GEAR PARTS BAG.
Open the Main Gear Parts Bag and carefully remove the
contents. Confirm that you have the following items and
then return them to the Main Gear Parts Bag.
R
R
R
R
R
STEP 1.6 - CHECK OFF CONTENTS OF
THE NOSE GEAR PARTS BAG.
Open the Nose Gear Parts Bag and carefully remove the
contents. Confirm that you have the
following items and then return them to
the Nose Gear Parts Bag.
R
R
R
R
R
2 Wheel collars
[COL]
with set
screws
R
R
R
R
R
1 Nose gear steering arm
[SA]
with
set screw
R
1 Pre-bent metal nose gear wire
[NG]
R
1 Ultralight treaded wheel 62 mm
(2-7/16 in.) diameter
[W]
R
R
R
R
R
2 Metal bolts
[CHB]
2.5 mm x 25-
30 mm (1 to 1-3/16 in.)
R
R
R
R
R
2 Plastic control horns
[CHH]
R
R
R
R
R
2 Plastic bevelled washers
[CHW]
R
R
R
R
R
2 Plastic T-nuts.
[CHN]
R
R
R
R
R
STEP 1.7 - CHECK OFF CONTENTS OF
THE CONTROL HORN PARTS BAG.
Open the Control Horn Parts Bag and carefully remove
the contents. Confirm that you have the following items
and then return them to the Control Horn Parts Bag.
R
R
R
R
R
STEP 1.8 - CHECK OFF CONTENTS OF
THE SERVO TRAY PARTS BAG.
The Servo Tray Parts Bag is
INSIDE THE FUSELAGE.
Undo the two securing screws and remove the servo tray
from the fuselage. Confirm that you have the following
items and then return them to the Servo Tray Parts Bag.
R
R
R
R
R
STEP 1.9 - CHECK OFF LOOSE
MATERIALS PACKED IN THE BOX.
Missing Something? Please See Page 3.
VMAR Challenger 40 ARF Parts Layout
NOTE:
- The elevator, rudder & steering push rods have been
pre-installed into the fuselage and are not shown here.
- Items ST, STDS, STSS, AW, and STMS are included in
the Servo Tray Bag and were temporarily installed in the
fuselage at the factory along with item CRT and two of
item COL.
- items EZ have been pre-installed on each end of the
pre-installed steering control rod at the factory.
- Items EM have been pre-installed in the fuselage at the
factory.
LEGEND:
- Items shown in the illustrations are flagged with legend
references in
BOLD UPPER CASE
and appear within
[SQUARE BRACKETS]
throughout the manual. These
are not part numbers. Please refer to the attached Listing
of Replacement Parts, Tools & Accessories for Part
Numbers applicable in your market area.
