B
BL
LA
AC
CK
K
BLACK
3
Image Pick-Up Device
TV System
Effective Pixels
Scanning System
Sync System
Resolution
Minimum Illumination
S/N Ratio
Gamma Characteristic
Video Output
Electronic Iris
Power Supply
Power Consumption
Lens (Included)
Operational Temp.
Dimension (W x H x D)
Weight
1/3” Super HAD High Resolution Color CCD
NTSC
768H × 494V (380K pixels)
2:1 INTERLACE
Internal / Line Lock
540TV Lines
0.1 Lux
More Than 50dB
Internal / Line Lock selectable
Composite: 1.0 Vp-p / 75 Ohm
1/60 ~ 1/100,000sec
AC 24V
120mA
Varifocal 4mm-9mm
14 Deg. ~ 122 Deg F (-10 Deg -+ 50 Deg C)
2.76" x 3.31" x 7.48" (70mm x 84mm x 190mm)
17.64 oz. (500g)
VTC-EVBV49/24
SPECIFICATIONS
2
Installation
1. Unit contains uninsulated dangerous voltage
within the enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
2. Use a 24 VAC Power Supply.
3. Read & Keep these instructions.
4. Heed to all warnings and follow all instructions
carefully.
5. Do not use near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. install in
accordance with the instructions.
8. Do not install near any heat source such as
radiators, heat resisters, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has to blades with one wider the other. A
grounding type plug has to blades and a third
grounding plug. The wide blade or the third
prong are provided for safety. if the provided
plug dose not fit into your into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on a
pinched particularly at plugs, convenience
receptacle, and the point where they exit from
the apparatus.
11. Only use attachment/accessories specified by
VITEK.
12. Use only with cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the Unit.
13. Unplug this unit during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel,
Servicing is required when the unit has been
damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the unit, the unit has
been exposed to rain or moisture, does not
operate normally or has been dropped.
15. Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personal.
CAUTION - To reduce the risk of electric shock, do
not perform any servicing other than contained in
these operating instructions unless you are qualified
to do so.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
1) Attach Shim to mounting surface
with the included Phillips Head
Screws then attach Camera to Shim
with the included Hex Head Screws.
2) Connect video to the BNC video
output and a AC 24V Power source
to the Power input.
3) Adjust Focus and Zoom with the
adjustment rings.
