Transcendent VT-TR5HA DVR Series
67
Pop-up Message Box
: if enabled, the system will pop up the corresponding alarm message box
automatically when the sensor alarm is triggered. To set the duration time of the message box,
please see 9.5.3 Display for details.
E-mail:
if enabled, the system will send an e-mail when the sensor alarm is triggered. Before
you enable the email, please configure the recipient’s e-mail address first (see 11.1.5 E-mail
Configuration for details).
9.2 Motion Alarm
Motion Alarm
: when motion appears in the specified area, it will trigger the alarm. You should
enable the motion of each camera first and then set the alarm handling of the camera to
complete the whole configuration of motion alarm.
9.2.1 Motion Configuration
�
Click Start
à
Settings
à
Camera
à
Motion to go to the following interface.
�
Select the camera, enable the motion and set the sensitivity and duration of the camera.
Sensitivity
: the higher the value is, the more sensitive it is to motion. You should adjust the
value according to the practical conditions since the sensitivity is influenced by color and time
(day or night).
Duration
: it refers to the interval time between the adjacent motion detections. For instance, if
the duration time is set to 10 seconds, once the system detects motion, it will go to alarm and
would not detect any other motion (specific to camera) in 10 seconds. If there is another motion
detected during this period, it will be considered as continuous movement; otherwise it will be
considered as a single motion.
Transcendent VT-TR5HA DVR Series
68
�
Drag the camera image to set the motion area. You can set more than one motion area.
Click “All” to set the whole camera image as the motion area. Click “Reverse” to swap the
motion area and the non-motion area. Click “Clear” to clear all the motion areas.
�
Click “Apply” to save the settings. Click “Processing Mode” to go to the alarm handling
configuration interface of the motion alarm.
9.2.2 Motion Alarm Handling Configuration
�
Click Start
à
Settings
à
Alarm
à
Motion Alarm to go to the following interface.
�
Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,
“Pop-up Video” and “E-mail”. The alarm handling setting of motion alarm is similar to that of
the sensor alarm (see 9.1 Sensor Alarm for details).
�
Click “Apply” to save the settings. You can click “Motion Settings” to go to the motion
configuration interface.
9.3 Intelligence Alarm
9.3.1 Object Detection
Object Detection Configuration
:
�
Click Start
à
Settings
à
Camera
à
Intelligent Detection
à
Object Detection to go to the
following interface.
�
Select the camera, enable the object detection and set the duration and detect type. There
are two detect types: Abandon Object and Missing Object.
Abandon Object
: The relevant alarms will be triggered if there are articles left in the detection
area drawn by the user.
Missing Object
: The relevant alarms will be triggered if there are articles missing in the
detection area drawn by the user.
�
Select the warning area and input the area name. You can add 4 warning areas at most.
�
Draw the warning area of the object detection. Refer to the interface as shown above.
