Vitek Transcendent VT-TTAR Series, Руководство пользователя

Страница: 23 / 100

Transcendent DVR Series
22
The buttons in area are introduced in the table below.
Button Meaning
Start button. Click it to pop up area
③
.
Full screen button. Click it to show full screen; click it again to exit the full screen.
Screen mode button.
Dwell button (see 5.2.2 Quick Sequence View and 5.2.3 Scheme View In Sequence for
details).
Click it to enable OSD; click to disable OSD.
Click to set the default playback time before starting instant playback (8.1 Instant
Playback) or going to the playback interface for playback operations (8.2 Playback Interface
Introduction); click
to go to the playback interface. For instance, if you choose “5
minutes ago” as the default playback time, you can playback the recording from the past five
minutes.
Manual record button. Click it to enable/disable record.
Manual alarm button. Click it to trigger or clear the alarm-out manually in the popup
window.
Record status button. Click it to view the recording status.
Alarm status button. Click it to view the alarm status.
Disk status button. Click it to view the disk status and RAID status.
Network status button. Click it to view the network status.
Information button. Click it to view system information.