Transcendent DVR Series
26
Ø
System
The module covers the functions of
Basic Configuration
(see 11.2 Basic Configuration for
details),
Device Information
(see 11.7 View System Information for details),
Log Information
(see 11.6 View Log for details) and
Configuration File Import&Export
(see 11.5 Backup and
Restore for details) and so on.
4
Camera Management
4.1 Signal Access Set
Click
Start
à
Settings
à
Camera
à
Manage Camera
à
Signal Access Set
to go to the
interface as shown below.
There are two types of analog signals: TVI and AHD. If the access signal is TVI, you should
check TVI in the following interface to show the camera image; if you check AHD, then there
will be no image or the image has no color. The default selection of the signal is Auto. If you
check Auto, then the image of the camera will be shown regardless of the access signal type.
LITE: if you check LITE the resolution will change from 1920 x 1080 to 960 x 1080
This will allow you to record at 30fps
4.2 Add/Edit Camera
4.2.1 Add Camera
The network settings of the DVR should be set before adding IP camera (see 11.1.1 TCP/IPv4
Configuration for details).
Refer to the pictures below. Click
Add Camera
in the setup panel or
in the top right
corner of the preview window to pop up the “Add Camera” window as shown below. You can
quickly add or add the IP camera manually.
Содержание Transcendent VT-TTAR Series
Страница 92: ...Transcendent DVR Series 91 ...
Страница 93: ...Transcendent DVR Series 92 ...
Страница 94: ...Transcendent DVR Series 93 ...
Страница 95: ...Transcendent DVR Series 94 ...