Vitek Transcendent VT-TTAR Series, Руководство пользователя

Страница: 21 / 100

Transcendent DVR Series
20
same local network with DVR and then click to add the found camera. Click “Add All”
to add all the cameras in the list. Click to delete the added camera. Click “Delete All” to
delete all the added cameras.
Click
to edit the found IP camera as shown on the below left. Input the new IP address,
subnet mask, gateway and the password of the camera. Click “OK” to save the settings.
Click
to edit the added camera as shown on the above right. Input the new camera name,
IP address, port, username and the password of the camera. You can click “Test” to test the
effectiveness of the inputted information. Click “OK” to save the settings. You can change the
camera name only if it’s an analog camera or the added IPC is online. Click “Next” to continue.
Disk Settings. You can view the disk number, disk capacity of the DVR and serial number,
R&W status of the disk. Click “Formatting” to format the disk. Click “Next” to continue.