Transcendent DVR Series
44
make sure the analog speed dome camera is connected to the DVR before you control it.
Select the camera and then set the protocol, baud rate and address of the dome according to the
settings of the dome.
Protocol
: The default communication protocol of the DVR is COC. Range from: PELCOP,
PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, COC, etc.
Address
: The address of the PTZ device.
Baud Rate
: Baud rate of the PTZ device. Range from: 110, 300, 600, 1200, 2400, 4800, 9600,
19200, 34800, 57600, 115200, 230400, 460800, 921600.
7
Record & Disk Management
7.1 Record Configuration
7.1.1 Mode Configuration
Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click
Start
à
Settings
à
Record
à
Mode Settings
to go to the mode settings interface. You can set
the record time under the “Manual Record Settings” and then click “Apply” button to save the
settings. There are two record modes: auto mode and manual mode.
Содержание Transcendent VT-TTAR Series
Страница 92: ...Transcendent DVR Series 91 ...
Страница 93: ...Transcendent DVR Series 92 ...
Страница 94: ...Transcendent DVR Series 93 ...
Страница 95: ...Transcendent DVR Series 94 ...