Vitek Transcendent VT-TTAR Series, Руководство пользователя

Страница: 77 / 100

Transcendent DVR Series
76
through the internet, you need to input IP address plus HTTP port in the browser address bar i.e.
http://192.168.11.61:81.
Server Port : the default server port of the DVR is 6036. The server port number can be
changed as required. The port is mainly used in network video management system.
RTSP Port : RTSP real-time stream protocol can be used to control the sending of real-time
data. By media player which supports the RTSP real-time stream protocol,. The default RTSP
port is 554 and it can be changed as required.
11.1.3 DDNS Configuration
The DDNS is used to control the dynamic IP address through domain name. You can access the
DVR easily if the DDNS is enabled and configured.
Click
Start à Settings à Network à DDNS to go to the interface as shown below.
Check “Enable” and then select the DDNS type. Input the server address, domain name,
username and password according to the selected DDNS type. Click “Test” to test
the effectiveness of the inputted information. Click “Apply” to save the settings.
You will have to input the server address and domain name if some DDNS types are selected.
Go to the relative DNS website to register domain name and then input the registered domain
information here). Take
www.vitekivpddns.com for example.
Input www.vitekivpddns.com in the IE address bar to visit its DNS website.
Note: The HTTP port and server port of the DVR should be mapped to the router before you access
the DVR via WAN.