Vitec Multimedia CellCom 10, Инструкция по эксплуатации

Страница: 46 / 90

C E L L C O M 1 0 W I R E L E S S C O M M U N I C A T I O N S Y S T E M
5 - 8
7. Your changes are saved and applied automatically five seconds after the last
time you press or turn the setup/enter knob. The front-panel display flashes to
indicate that the changes are being saved and applied.
To edit a group that already has members, go through the procedure above to
reach the member labels. Scroll through the list, using presses of the rotary
encoder to select and de-select members. Exit as above, and save the changes in
the system memory.
ASSIGNING LABELS TO BELTPACKS KEYS
You have completed the following steps in setting up the system:
• Created names (“labels”) for the CellCom beltpacks and for the devices wired
to the base-station’s rear panel
• Created names (“labels”) for communication groups and assigned members to
the each group.
The next step is to assign these communication routes to the individual CellCom
beltpacks.
For this example, communication routes are assigned to the beltpack in position
one—BPK01. The procedure is identical for all remaining beltpacks.
To assign talk and listen routes (“labels”) to a beltpack’s keys:
1. From the MAIN menu, select BELTPACKS.
The AVAILABLE BELTPACKS screen appears.
2. Select the beltpack to which you wish to assign labels. The
PROGRAMMING OPTIONS screen appears.
3. Select KEYS. The KEY EDITING screen appears, as shown in Figure 14.
Figure 14: Assign communication routes (“labels”) to a beltpack key
You can assign six communications routes (“labels”) to a CellCom beltpack:
• Page 1 of the beltpack’s display screen shows the first assignments for the
Talk A and Talk B knobs (2 assignments).
• Page two shows the next set of assignments for the Talk A and Talk B knobs
(2 assignments).
• Page three shows the next set of assignments for the Talk A and Talk B
knobs (2 assignments).
S ELEC T KEY T O BE EDI T ED
Pg1-2
S M1-A
Pg2-1
A1-A Pg2-2
L
TG 1A
Pg3-1
S M2-A
Pg3-2
AUD-A Pg1-1
STG -A
BACK