Vitec Multimedia CellCom 10, Инструкция по эксплуатации

Страница: 16 / 90

C E L L C O M 1 0 W I R E L E S S C O M M U N I C A T I O N S Y S T E M
2 - 4
ASSIGNING LABELS TO THE CELLCOM BELTPACKS
To assign a name (“label”) to CellCom beltpack #1:
1. From the base station’s front-panel display, use the setup/enter knob to select
BELTPACKS, then BPK01, and then LABEL.
Rotate the setup/enter knob until the desired item is highlighted. Press the
knob in to select the item.
2. Rotate the setup/enter knob again to select the alphanumeric character that
you wish to edit, then push the setup/enter knob in to select the character.
Rotate the knob to select the character you wish to replace it with. Press the
knob in to select the new character.
3. When you have completed selecting characters for the beltpack’s item label,
press the setup/enter knob again to save.
A message appears on the base station’s screen to let you know the changes
have been saved and applied.
4. To exit the menu, select and then deselect (by pressing the knob again) the
fifth character in the menu.
5. Your changes are saved and applied automatically five seconds after the last
time you press or turn the setup/enter knob. The front-panel display flashes to
indicate that the changes are being saved and applied.
6. Power cycle the beltpack off and then on again to see the changes reflected in
the beltpack’s front-panel display.
7. Repeat this entire process for the second wireless beltpack, BPK02.
CREATING A GROUP
To create a group:
1. From the base station’s front panel, use the setup/enter knob to scroll to and
select GROUPS, then GP#01, then MEMBERS.
A number of entries in the MEMBERS menu are outlined. An outline around
a menu entry means that it is a member of the group. When you select an
item, an outline appears around it. When you select the item again, the
outline disappears.
2. Select the following members of the group: 4WIR1, PLCHA, BPK01,
BPK02, so that only these entries are outlined.
3. To exit the Group Members menu, scroll to and select BACK from the base
station’s front-panel menu.
4. Your changes are saved and applied automatically five seconds after the last
time you press or turn the setup/enter knob. The front-panel display flashes to
indicate that the changes are being saved and applied.