![background image](http://html.mh-extra.com/html/vitalmaxx/jy-404/jy-404_instruction-manual_1034495026.webp)
26
4. Stand on the scales. Make sure that your feet are placed correctly on the contact areas.
The body weight will be calculated.
5.
Once the body weight has been established, the number on the display begins to flash.
The other values are calculated immediately after this. This is indicated by the countdown
"oooo" (runs from left to right) on the display.
6. During the countdown, you should remain still on the scales. As soon as your weight
appears on the display again, you can get off the scales. The calculated values are shown
on the display three times in the following order: weight, body fat, water, muscle mass,
bone mass and calorie demand. At the same time, the measured result indicators tell you
whether you are overweight (red arrow flashes), a normal weight (yellow dashes flash) or
underweight (green arrow flashes).
Each user profile has 5 memory locations for values calculated at an earlier date. The
weight and the body fat content are stored.
If you are weighing yourself for the first time, there will be no earlier values stored
in your memory. The scales automatically switch off after the third run through your
current values.
If you have already weighed yourself at least once previously, the values which were
calculated at the time have been stored in your memory. The values from the last
weighing are always saved in memory location P 1. The older values are pushed back
to the following locations (P 2 to P 5). If all of the memory locations are occupied, the
oldest values "drop" out of the memory.
To be able to look at earlier values, please proceed as follows:
7. After your calorie demand has been displayed the third time, the countdown "oooo" on
the display begins to run from left to right again.
8. Press
during
the countdown the
or
button. The display shows "P 1".
9. If you want to display the values from memory location P 1 (the values of the last weighing)
directly, press the
EnTER
button. If you have already previously weighed yourself twice
or more, further memory locations are also occupied. To choose between the memory
locations, use the
and
buttons. Press the
EnTER
button to confirm your choice.
Please note that only occupied memory locations are available to choose from. Locations
which are not yet occupied will not be shown in the choice available.
10. The values which are stored in the memory location you have chosen will be displayed
twice in turn: First the weight, then the body fat content. The countdown "oooo" will then
run again on the display from left to right. To display further values, proceed in the manner
described in steps 8 and 9.
06779_DE-GB-FR-NL_V1.indb 26
06.09.11 18:36
Содержание JY-404
Страница 59: ...59 06779_DE GB FR NL_V1 indb 59 06 09 11 18 36...
Страница 60: ...06779_DE GB FR NL_V1 indb 60 06 09 11 18 36...