vita V60 i-Line, Руководство по эксплуатации

Страница: 17 / 36

17
VITA V60 i-Line ®
20 Modifying program values
To modify program values, touch the relevant program area in which the
values are to be changed. The corresponding editing window opens and
modifications can be made to the program.
Program values shown in white are saved values. Program values shown in
red apply for a program sequence until a program change is implemented.
When the program is reselected, the previously-stored values are displayed
again.
The
program values shown in red
can be
saved permanently using the
save button if a program lock (see section 20.7) has not been set (lock is
open). The program is then available for editing and the save button is shown
as active (see section 20.5).
If the program lock is active (lock is closed), changes can be made once.
However, it is only possible to save the changes by entering the PIN using the
keypad shown once the save button is pressed (see section 21.8).
Shows the current lift position
see section 20.1 Vacuum settings
see section 20.4 Save button
see section 20.5
Pre-drying
(see section
20.1) 1st increase in tem-
perature / hold time
(see section 20.2) 2nd increase in tem-
perature / hold time
(see section 20.2)
Cooling
(see section 20.3)
1st dentine firing