background image

D-303169 KP-160 PG2 Installation Instructions 

15 

 

WARRANTY 

 

Visonic Limited (the “Manufacturer") warrants this 

product only (the "Product") to the original purchaser 

only (the “Purchaser”) against defective 

workmanship and materials under normal use of the 

Product for a period of twelve (12) months from the 

date of shipment by the Manufacturer.   
This Warranty is absolutely conditional upon the 

Product having been properly installed, maintained 

and operated under conditions of normal use in 

accordance with the Manufacturers recommended 

installation and operation instructions.  Products 

which have become defective for any other reason, 

according to the Manufacturers discretion, such as 

improper installation, failure to follow recommended 

installation and operational instructions, neglect, 

willful damage, misuse or vandalism, accidental 

damage, alteration or tampering, or repair by 

anyone other than the manufacturer, are not 

covered by this Warranty. 
The Manufacturer does not represent that this 

Product may not be compromised and/or 

circumvented or that the Product will prevent any 

death and/or personal injury and/or damage  to 

property resulting from burglary, robbery, fire or 

otherwise, or that the Product will in all cases 

provide adequate warning or protection.   The 

Product, properly installed and maintained, only 

reduces the risk of such events without warning and 

it is not a guarantee or insurance that such events 

will not occur.  

THIS WARRANTY IS EXCLUSIVE AND 

EXPRESSLY IN LIEU OF ALL OTHER 

WARRANTIES, OBLIGATIONS OR LIABILITIES, 

WHETHER WRITTEN, ORAL, EXPRESS OR 

IMPLIED, INCLUDING ANY WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE, OR OTHERWISE.  IN 

NO CASE SHALL THE MANUFACTURER BE 

LIABLE TO ANYONE FOR ANY 

CONSEQUENTIAL OR INCIDENTAL DAMAGES 

FOR BREACH OF THIS WARRANTY OR ANY 

OTHER WARRANTIES WHATSOEVER, AS 

AFORESAID. 

THE MANUFACTURER SHALL IN NO EVENT BE 

LIABLE FOR ANY SPECIAL, INDIRECT, 

INCIDENTAL, CONSEQUENTIAL OR PUNITIVE 

DAMAGES OR FOR LOSS, DAMAGE, OR 

EXPENSE, INCLUDING LOSS OF USE, PROFITS, 

REVENUE, OR GOODWILL, DIRECTLY OR 

INDIRECTLY ARISING FROM PURCHASER’S 

USE OR INABILITY TO USE THE PRODUCT, OR 

FOR LOSS OR DESTRUCTION OF OTHER 

PROPERTY OR FROM ANY OTHER CAUSE, 

EVEN IF MANUFACTURER HAS BEEN ADVISED 

OF THE POSSIBILITY OF SUCH DAMAGE. 

THE MANUFACTURER SHALL HAVE NO LIABILITY 
FOR ANY DEATH, PERSONAL AND/OR BODILY 
INJURY AND/OR DAMAGE TO PROPERTY OR 
OTHER LOSS WHETHER DIRECT, INDIRECT, 
INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, 
BASED ON A CLAIM THAT THE PRODUCT FAILED 
TO FUNCTION.

  

However, if the Manufacturer is held liable, whether 

directly or indirectly, for any loss or damage arising 

under this limited warranty, 

THE 

MANUFACTURER'S MAXIMUM LIABILITY (IF 

ANY) SHALL NOT IN ANY CASE EXCEED THE 

PURCHASE PRICE OF THE PRODUCT,

 which 

shall be fixed as liquidated damages and not as a 

penalty, and shall be the complete and exclusive 

remedy against the Manufacturer.  
When accepting the delivery of the Product, the 

Purchaser agrees to the said conditions of sale and 

warranty and he recognizes having been informed 

of. 
Some jurisdictions do not allow the exclusion or 

limitation of incidental or consequential damages, so 

these limitations may not apply under certain 

circumstances.  
The Manufacturer shall be under no liability 

whatsoever arising out of the corruption and/or 

malfunctioning of any telecommunication or 

electronic equipment or any programs.

 

The Manufacturers obligations under this Warranty 

are limited solely to repair and/or replace at the 

Manufacturer’s discretion any Product or part 

thereof that may prove defective.  Any repair and/or 

replacement shall not extend the original Warranty 

period.  The Manufacturer shall not be responsible 

for dismantling and/or reinstallation costs.  To 

exercise this Warranty the Product must be returned 

to the Manufacturer freight pre-paid and insured.  All 

freight and insurance costs are the responsibility of 

the Purchaser and are not included in this Warranty. 

This warranty shall not be modified, varied or 

extended, and the Manufacturer does not authorize 

any person to act on its behalf in the modification, 

variation or extension of this warranty. This warranty 

shall apply to the Product only.  All products, 

accessories or attachments of others used in 

conjunction with the Product, including batteries, 

shall be covered solely by their own warranty, if any.

 

The Manufacturer shall not be liable for any damage 

or loss whatsoever, whether directly, indirectly, 

incidentally, consequentially or otherwise, caused by 

the malfunction of the Product due to products, 

accessories, or attachments of others, including 

batteries, used in conjunction with the Products. 

This Warranty is exclusive to the original Purchaser 

and is not assignable.  
This Warranty is in addition to and does not affect 

your legal rights. Any provision in this warranty 

which is contrary to the Law in the state or country 

were the Product is supplied shall not apply.  

Warning: 

The user must follow the Manufacturer’s 

installation and operational instructions including 

testing the Product and its whole system at least 

once a week and to take all necessary precautions 

for his/her safety and the protection of his/her 

property. 

1/08

 

 

Содержание Keyprox

















Отзывы: