D-303169 KP-160 PG2 Installation Instructions
9
3. USING THE KEYPROX
3.1 Arming and Disarming the System
Step
Basic Arming
User Actions
Keyboard & Panel
Response
1
Select a
PARTITION
(1)
(if Partition is
enabled)
Any combination of
The selected key
blinks.
2
Arm AWAY
+
[present TAG]
(4)
The selected key and the
Present Prox Tag key
(
) begins to blink and
prompts you to present
your Tag.
The keyprox's LED blinks
red once to indicate
transmission of the
arming command to the
control panel. The LED
and the buzzer then
indicate the control
panel's response – see
“System Status and
Indications”
section 3.3.
Arm HOME
+
[present TAG]
(4)
Disarm (OFF)
+
[present TAG]
(4)
3
Quick arm AWAY
(3)
(If Quick Arm is
enabled)
(
2 sec.)
Quick arm HOME
(3)
(If Quick Arm is
enabled)
(
2 sec.)
4
INSTANT
(After arming HOME/ AWAY)
(5) (6)
LATCHKEY
(After arming AWAY)
(6)
Notes
:
1. If Partition is disabled at the control panel, skip Step 1.
2. If Partition is enabled at the control panel and a partition was not selected in Step 1,
Step 2 will activate all of the partitions assigned to the user.
3. The Quick arm functions only if enabled at the control panel.
4. If the action is not completed while the selected arming key is blinking, the desired
function will not be executed.
5. Press the INSTANT key within maximum 8 seconds timeout period after completing the
previous step. This will delete the entry delay for the current arming session.
6. For LATCHKEY activation, press the LATCHKEY key within maximum 8 seconds
timeout period after completing the previous step.
You can perform the LATCHKEY and INSTANT functions, one after the other. The
order is not important.
LATCHKEY and INSTANT functions can be operated only during exit delay.
