Page 7
LGR User Guide and Technical Manual
LGR Operation
The
LiveGear Receiver
features a front panel User Interface - an alphanumeric LCD
menu-driven display as well as a convenient Web interface, putting the intuitive control
of this device at your fi ngertips using a pc, tablet, laptop or smart phone. Refer to the
fi gures below for the LGR front and rear connections and controls.
Power Switch
Local Area Network
Ethernet Port
Front Panel UI Controls
IFB I/O Plugs
AC Power Cable Input &
Power Supply Switch
Local Area Network Ethernet Ports
Wide Area Network Ethernet Port
SD/HD SDI Out Coaxial
Connections
GEN 1 = GEN LOCK IN
1 & 2 = SD/HD SDI OUT
Debugging Connections
[for factory use only]
Front Panel Liquid Crystal Display [LCD]
Install the WAN, LAN and Coaxial connections. After installing the AC power cord,
set the power supply switch to 1 and press the Power switch on the LGR face plate to
display the LCD panel. The front panel LCD UI provides a means to view the basic LGR
settings that can be controlled via the LGR Web interface [refer to page 12]. Refer to
Appendix A: LGR Connectors & Controls
for more information.
