Page 24
LGR User Guide and Technical Manual
Appendix A: LGR Connectors & Controls
Connectors and controls are described below.
Table 1: LGR-1000 Control Panel & Connections
Name
Connector
Description
Power Switch
N/A
This is a momentary switch that when pressed, activates the LGR-1000
if the AC power supply switch is set to the 1 position..
LGR Front Panel
Display
N/A
Local User Interface Alphanumeric LCD menu-driven display with 6 push
button controls:
Enter/OK button selects an item.
Cancel or go Back using this button.
Right arrow button scrolls to the right.
Left arrow button scrolls to the left.
Up arrow button scrolls up.
Down arrow button scrolls down.
There are 8 items shown on the Front Panel Display:
The LiveGear logo
Video Output setting [channel 2]
LGR Serial Number
Video Output setting [channel 1]
Software Version
WAN IP
Support ID
LAN IP
LAN
RJ-45
Local Area Network Ethernet Port [on front] - Connects bi-directional IP
signal from receiver to local video devices such as: VMS-1100, DVR,
PCs, laptops or other video recording devices.
GEN 1
BNC female
Genlock [generator locking] is a technique where the video output of one
source, or a specifi c reference signal from a signal generator, is used
to synchronize and integrate video sources within the internal [LAN]
network. The aim in video applications is to ensure the coincidence
of signals in time at a combining or switching point. When video
instruments are synchronized in this way, they are said to be generator
locked, or “genlocked.“
HD-SDI or SD-SDI
OUT [1 & 2]
BNC female
Digital output HD, 75 ohm, SMPTE 292M or SMPTE 259M
WAN
RJ-45
Wide Area Network Ethernet Port - Delivers the bi-directional IP signal
input.
LAN
RJ-45
Four Local Area Network Ethernet Ports - Connects bi-directional IP
signal from receiver to local video devices such as: VMS-1100, DVR,
PCs, laptops or other video recording devices [in addition to the front
panel LAN port].
IFB
two 1/8 in. [3.5
mm] Plugs
Two single channel, two-way communication on one Line audio plug and
one MIC plug
AC Power Supply
switch
N/A
0 = Off, 1 = AC On
AC Power Input
3 prong male
Standard 3-Prong IEC C5 100-240 VAC connector
Debugging
Connections
two USB & one
HDMI ports
For factory use only
