Page 15
LGR User Guide and Technical Manual
WAN Confi guration
IP Type
The Internet Protocol Type drop-down entry fi eld provides the choice of either Static or
DHCP [Dynamic Host Confi guration Protocol] to confi gure the LiveGear receiver. Set your
own IP address by selection of Static IP Type or change to DHCP to set the address from
your DHCP server.
IP Address
The Internet Protocol Address that is used by the LiveGear receiver can be modifi ed using
the IP Address entry fi eld. Click within the fi eld and type the value of the address that you
want to modify. Click
Save
to retain the IP Address.
Net Mask
A sub-network, or subnet, is a logically visible subdivision of an IP Network.
To change the LGR Local Subnet address, click within the address fi eld and type the
value of the address that you want to modify. Modify the Subnet address to match settings
provided by your network administrator. Click
Save
to retain the Subnet Mask Address.
Gateway
The Gateway address, or Default Gateway, is a router interface connected to the Local
or Wide Area Network [LAN or WAN] used to send packets from the LAN. The Gateway
Address that is displayed for the LGR can be modifi ed. Click within the address fi eld
and type the value of the address that you want to modify or enter. Modify the Gateway
address to match settings provided by your network administrator. Click the
Save
tab to
retain the IP Address.
DNS Server
The DNS IP Address that is displayed for the LGR can be modifi ed. Click within the fi eld
and type the DNS address. Modify the DNS IP address to match settings provided by
your network administrator. Click
Save
to retain the IP Address.
LAN Confi guration
For information regarding IP Address, Net Mask, Gateway and DNS, see the explanations
listed above.
IP Type
The Internet Protocol Type drop-down entry fi eld provides the choice of
• Static
• DHCP [Dynamic Host Confi guration Protocol] Client or
• DHCP Server
to confi gure the LiveGear receiver. Set your own IP address by selection of Static IP Type
or change to DHCP to set the address from your DHCP server.
