ADSL2/2+ 11N WiFi Router User’s Manual
48
dynamic channel selection to determine the best channels to
transmit in order for optimal operation.
Control Sideband
Select the extension channel to be in the Upper or Lower
sideband.
802.11n Rate
Set the 802.11n rate. These rates are only applicable when the
802.11n/EWC is configured as
Auto
.
802.11n Protection
Select
Auto
if there is a possibility that 802.11b or 802.11g
devices will use your wireless network. In Auto mode, the wireless
devices use RTS/CTS to improve 802.11n performance in mixed
802.11g/802.11b networks. Select
Off
to maximise 802.11n
throughput under most conditions.
Support 802.11n
Client Only
Select On to support 802.11n clients only
54g™ Rate
This value cannot be changed.
Multicast Rate
Use the default setting “Auto” unless there is a specific
requirement for multicast.
Basic Rate
Use the default setting “Auto” unless there is a specific
requirement for basic rate.
Fragmentation
Threshold
Specify a value between 256 (min) and 2346 (max). This value
determines whether packets will be fragmented and at what size.
RTS Threshold
Specify a value to determine the packet size of a transmission
through the use of the router to help control traffic flow. The default
value of 2347 (maximum length) disables RTS (Request To Send)
Threshold.
DTIM Interval
Specify the wake-up interval for clients in power-saving mode.
DTIM (Delivery Traffic Indication Message) is as known as Beacon
Rate.
Beacon Interval
Specify the mount of time between beacon transmissions.
Global Max Clients
Specify the maximum clients that are allowed to connect to the
Freeway DSL.
Xpress™
Technology
Select to enable or disable Xpress™ Technology. Xpress™
Technology is a Broadcom innovation. It utilizes standards based
on framebursting to achieve higher throughput. With Xpress™
Technology enabled, aggregate throughput (the sum of the
individual throughput speeds of each client on the network) can
improve by up to 25% in 802.11g only networks and up to 75% in
mixed networks comprised of 802.11g and 802.11b equipment.
Transmit Power
Select power output to be 20%, 40%, 60%, 80% and 100%.
WMM (Wi-Fi
Multimedia)
Select the mode to “Auto” for automatically improves the
experience for audio, video and voice applications over a Wi-Fi
network.
WMM No
Acknowledgement
Select to enable or disable WMM ACK. Enable this feature only
when you are at a good communication quality and low
interference area.
WMM APSD
Select to enable or disable ASPD (Automatic Power Save
Delivery). It is a more efficient power management method for low
power consumption.
