ADSL2/2+ 11N WiFi Router User’s Manual
13
Authentication Method
Select the authentication method to be PAP, CHAP or
MSCHAP. Select “Auto” to allow the Freeway DSL to
negotiate with PPP server automatically.
Enable Fullcone NAT
Check to enable fullcone NAT feature.
Dial on Demand
Check to enable DOD feature.
Inactivity Timeout
(minutes)
Specify the inactivity timeout (in minute) for DOD feature.
PPP IP Extension
Check to enable PPP IP extension.
Use Static IPv4 Address
Check and enter the static IPv4 address.
Enable PPP Debug Mode
Check to enable PPP debug mode.
Bridge PPPoE frames
Between WAN and Local
Ports
Check to enable the PPPoE fames bridging between WAN
and Local Ports.
IGMP Multicast
Check to enable IGMP multicasting.
IP over Ethernet (MER) Mode
Field Description
Obtain an IP Address
Automatically
Select and select your preferred WAN interface from drop-down
list. This allows the Freeway DSL to obtain the DNS server
information automatically.
Option 60 Vendor ID
Your ISP will assign the Vendor Class IDentifier automatically.
This option can be used by DHCP clients to identify the vendor
and functionality of a DHCP client.
Option 61 IAID
Your ISP will assign the IAID (Identity Association IDentifier)
automatically.
Option 61 DUID
Your ISP will assign the DUID (DHCP Unique IDentifier))
automatically.
Option 125
Select this item (Vendor-Identifying Vendor-Specific) to tell the
Freeway DSL which firmware it has to download.
User the following
Static IP Address
Select this mode and enter the static IP address, subnet mask
and gateway IP address provided by your ISP.
