ADSL2/2+ 11N WiFi Router User’s Manual
3
2.2 Ports and Buttons
The rear panel contains the ports for the Freeway DSL's data and power connections.
1.
ON/OFF:
Power switch to power on/off the Freeway DSL.
2.
POWER:
Connecter for a power adapter. Using a power supply with a different voltage
rating will damage this product. Make sure to observe the proper power requirements.
The requirement of adapter is 12V/1A.
3.
USB:
Connects for USB supported printer or USB mass storage.
4.
LAN1-4:
Connectors for Ethernet network devices, such as a PC, hub, switch or router.
5.
DSL:
Connecter for accessing the Internet through ADSL line.
6.
Reset:
Restore the default settings. You may need to restore the Freeway DSL to its
factory defaults if the configuration is changed, you loose the ability to enter the Freeway
DSL via the web interface, or following a software upgrade, and you loose the ability to
enter the Freeway DSL. To reset the Freeway DSL, simply press the reset button for
more than 8 seconds. The Freeway DSL will be reset to its factory defaults. The reboot
process will take a about 30 seconds and the Freeway DSL will become operational again.
2.3 Installing your Freeway DSL
1.
Locate an optimum location for the Freeway DSL.
2.
For connections to the Ethernet and DSL interfaces, refer to the Quick Start Guide.
3.
Connect the Power Adapter. Depending upon the type of network, you may want to put
the power supply on an uninterruptible supply. Use only the power adapter supplied with
the Freeway DSL. A different adapter may damage the product.
5
2
1
4
3 6
