ADSL2/2+ 11N WiFi Router User’s Manual
28
Assign Classification
Queue
Select the classification queue for the traffic class.
Mark DSCP
Select the DSCP to mark. Different markers representing
different grades of service placed on various packet streams to
be recognized by the router for route purposes.
Mark 802.1p Priority
If 802.1q was enabled on WAN, then select a value between 0-7.
Tag VLAN ID
Enter a VLAN ID for the packet to tag.
6.8 Routing
6.8.1 Default Gateway
This page allows you to select a preferred WAN interface to be the system’s default gateway.
6.8.2 Static Route
This page allows you to add the routing table. A maximum of 32 entries can be configured.
Click
Add
to configure the routing table. Enter the routing information and then click
Save/Apply
.
Field Description
Destination Network
Address
Enter the destination address of the LAN IP.
Subnet Mask
Enter the subnet mask of the LAN IP.
Use Interface
Check and select a WAN interface for static route.
Use Gateway IP Address
Check and enter the gateway address of the remote router.
