Vision Research Phantom Flex4K Скачать руководство пользователя страница 23

Страница: 23 / 94

Chapter 4: On-Camera Controls

A long press switches the camera between Loop mode
and Run/Stop Mode (for longer duration direct CineMag
recording).

The symbol changes based on the camera’s state:

Live:

The camera is not recording and a live image is

displayed from all SDI ports. Generally, this is the state
when camera first booted up.

Capture:

The camera is recording to internal memory

(RAM), and awaiting a trigger signal.

Triggered:

The camera has been triggered, and is

filling RAM memory (‘Post-Trigger’ frames) or is writing
to CineMag in R/S mode.

Cine Stored:

Recording has ended, and a Cine is

stored in RAM memory. This Cine must be erased from
the RAM to begin recording again.

Playback:

The camera is in PLAYBACK mode. RAM

Cines can be reviewed and saved to a CineMag IV.
CineMag takes can also be selected for playback.

Indicates the time code stamped to each frame.

This timeline represents all frames available in camera
RAM (Loop mode), or the CineMag (Run/Stop) mode.
In ‘Loop’ mode, the ‘T’ indicator represents the user-
defined trigger point. In R/S mode the bar indicates
used space.

Indicates the memory size of the CineMag (if present)
and the total recording time available.

Displays audio status. Red speaker icon = audio not
enabled; Green icon = audio enabled

Displays the supplied DC voltage level. The status color
will change from green (good charge) to yellow to red
(indicates low battery).

This field displays the ‘Tools’ function status when
active (Zoom 1; Zoom 2; Threshold; and the BREF
status).

Mode

Camera Status

Time Code

Buffer Bar w/Trigger Point

CineMag Status

Audio Status

DC / Battery Status

Tools Display

Содержание Phantom Flex4K































































































Результаты поиска

Содержание Phantom Flex4K

Отзывы:

Похожие инструкции для Phantom Flex4K

Бренды по названию

Популярные бренды

Vision Research Phantom Flex4K, Руководство пользователя

Результаты поиска

Содержание Phantom Flex4K

Отзывы:

Похожие инструкции для Phantom Flex4K

Бренды по названию

Популярные бренды