Vision Research Phantom Flex4K, Руководство пользователя

Страница: 16 / 94

10
Phantom Flex4K Manual
From the ‘Home’ menu; press the button above WB (White
Balance). Choose one of the pre-sets, or perform an Auto
WB by pointing the camera towards a non-saturated white
area to fill the center of the frame. Press the button above
‘Auto’ in the WB menu and select ‘OK’.
Basic ‘Loop’ mode recording:
Hold in the ‘Trigger’ button for 2 seconds to put the
camera into capture mode. The button will glow red when
the camera is recording.
Press the ‘Trigger’ button when the event happens, keep
in mind the trigger position
Press the on-camera ‘Playback’ button to start playback.
The camera should start playing the latest RAM cine
captured.
Rotate the knob or apply long press to the play-forward
button to fast forward. A longer press increases fast
forward playback. Same with reverse play.
Locate the first image to be saved and tap the forward or
reverse buttons to pause playback. Then press the ‘Mark
In’ button to define a new start point. Play forward and
select the ‘Mark out’ position.
Press the button above ‘Save’ to save the marked
portion of the selected cine to a Phantom CineMag IV
(This option is disabled when playing back a cine from
the mag).
Perform White Balance
(Color Cameras Only)
Playback
Save to Phantom CineMag IV
Arm Camera
Trigger
Edit Cine
In ‘Loop’ mode the images are first recorded to
the internal RAM buffer, then previewed
and saved.
A long-press of the Mark In or Mark Out
buttons will re-set those points.