27
CHAPTER 5: PART REPLACEMENT GUIDE
5.8 Heart Rate and Quick Key Grips Replacement
1) Remove the 3 screws holding the HR & Quick key grip together (Figure A).
2) Once the 3 screws are removed, the HR & Quick key grip can be split into 2 pieces (Figure B).
FIGURE A FIGURE B
3) Disconnect the HR plate wiring, quick key cable, and remove the old grip (Figure C).
4) Reverse Steps 1-3 to install new HR grips. The white wire should be on the bottom side HR plate, the red wire on the upside. Make sure that the end
cap also gets installed (Figure D).
FIGURE C FIGURE D
5) Test the Bike for function as outlined in Section 5.24.
