33
CHAPTER 5: PART REPLACEMENT GUIDE
5.13 Lower Control Board Replacement
1) Remove the rear shrouds as outlined in Section 5.12.
2) Disconnect the 3 wire connections to the lower board (Figure A).
3) Remove the 2 screws holding the lower board to the frame (Figure B), and remove the lower control board.
FIGURE A FIGURE B
4) Reverse Steps 1-3 to install a new lower board. Figure C shows the connections at the board.
FIGURE C
5) Test the bike for function as outlined in Section 5.24.
J2 7 pin terminal to the console
J3 3 pin terminal to
the generator
J4 2 pin terminal to the power resistor
J3
J4
J2
