37
CHAPTER 5: PART REPLACEMENT GUIDE
5.17 Drive Belt Replacement
1) Remove the right side front shroud as outlined in Section 5.16.
2) Pull up on the tension assembly and walk the belt off the pulley (Figure A).
3) Remove the drive belt (Figure B).
FIGURE A FIGURE B
4) Reverse Steps 1-3 to install a new drive belt.
NOTE:
Be sure to re-attach the tension spring (Figure C). If more tension is needed on the drive belt,
multiple holes are available for the lower spring attachment (Figure C).
FIGURE C
5) Test the bike for function as outlined in Section 5.24.
