Viscount Legend '70s Artist, Руководство пользователя

Страница: 32 / 146

EN - 30
Legend ‘70s – User Manual
Modifying a Program

Rev Dry/Wet: balance between direct and reverberated signal.

Module Par1: control a module parameter (see table below). This function has to be enabled in
each module using the Foot Controller 1 and Foot Controller 2 parameters present in the menu
of the module concerned.

Module Par2: control a module parameter (see table below). This function has to be enabled in
each module using the Foot Controller 1 and Foot Controller 2 parameters present in the menu
of the module concerned.
Module Par 1 Par 2
E.PIANO Trem Intensity Trem Speed
A.PIANO Dynamic Brilliance
CLAVI Mute Mute
SOUND COLLECTION [KNOB 1] parameter [KNOB 2] parameter
EXTERNAL [CTRL 1] Control Change [CTRL 2] Control Change
NOTA
- The parameters assigned to the [AMOUNT] and [RATE] knobs vary according to the currently
selected effect. For further information read
EFFECTS section , page 32 .
Master Clock
Tempo source to synchronise the effects Tremolo, Chorus, Flanger, Phaser, Wah and Delay of
the EFFECTS section, and the Tremolo effect of the E.PIANO module.
Values:

Internal: tempo is set through the Master Tempo parameter.

External: tempo is set according to the MIDI Clock messages received by the instrument.
NB
- To enable/disable synchronisation, modify the Sync parameter, described under the submenu
EFFECTS of each effect.
- When an effect is synchronised with the External Master Clock, but no sync MIDI message is
available, the tempo is set to 120bpm.
Master Tempo
Tempo expressed in Beats per Minute (bpm) of the Master Clock parameter when is set to
Internal.
Values: between 25 and 250 bpm
NB
- When the Master Clock is set to External, the Master Tempo parameter is disabled and the
value will appear as ---
‚.
KEY RANGE section
Through the
KEY RANGE menu the user can assign each module to a specific keyboard zone, or to the Upper
or Lower section, when in Split mode. The Split mode can be enabled / disabled by pressing the [SPLIT] button
in the PROGRAM area of the main panel.
To access the
KEY RANGE menu, enter the EDIT PROGRAM page (read page 28 ), then place the cursor on
the KEY RANGE field and press the data entry dial.
Split mode disabled (SPLIT MODE = OFF)
When the Split mode is disabled, you can select a different keyboard range for each instrument module.
The top of the screen represents a keyboard; the lines below represent
the keyboard areas assigned to each module, as represented by the
acronyms:
- EP: E.PIANO
- AP: A.PIANO
- CL: CLAVINET
- SC: SOUND COLLECTION
- EXT: EXTERNAL
NB
Since the SOUND COLLECTION and EXTERNAL modules are comprised of two parts, the top line indicates the
keyboard area assigned to part 1, while the bottom line represents part 2.