Viscount Legend '70s Artist, Руководство пользователя

Страница: 25 / 146

EN - 23
Legend ‘70s – User Manual
Switching on and basic functions
Foot controller
A foot controller, or expression pedal, allows
continuous control of a parameter, unlike a
footswitch.
Pedals connected to the PEDAL [FOOT
CONTROLLER 1] and [FOOT CONTROLLER 2]
connectors can be assigned a range of
parameters, such as a Sound volume, tuning,
modulation, Wah-Wah and more.
Foot controllers are not included. There are two
types of foot controllers on the market: RTS and
TRS. The pedal type must be set correctly on
the
Legend '70s .
Using sounds
Legend ‘70s
features a wide range of sounds, also depending on the installed modules. As already described,
each single module contains several sound types. One or more modules can be played at the same time, up to
all active modules together.
To use one or more sounds, follow the procedure.
1.
Switch on the module of the desired sound by pressing its [ON/OFF] button.
2.
Turn the selection knob to select the sound (or sound group, for modules that have them e.g. SOUND
COLLECTION).
3.
If the module has sound groups, use the sound selection knob to choose a sound.
4.
Use the dedicated module controls to set the main sound parameters.
For a thorough description of sound parameters, read the description of the module Sections that can be found
under the
EDIT menu (page 42 and following) or by holding down the sound (or sound group) selection knob for
a short while.
Using effects
Legend ‘70s
includes a high quality effects section, comprised of two independent effect processors: FX1 and
FX2, of a reverb unit and a 3-band equalizer unit. The main effect parameters can be controlled through the
main panel. For a complete configuration of all parameters, access the dedicated sections under the
EDIT
menu. To control the FX1 or FX2 effect, first select it by pressing the respective button [1] or [2] of the
EFFECTS section on the panel.
The complete effects routing is explained by the following image:
FX1
Reverb
Master
EQ
MAIN
L-R
AUX1
AUX2
Sound
Module
FX2
Output
Routing
NB
- To set a pedal's type and polarity, read the chapter Pedal Setup Section , page 56 .
- To assign a function to a pedal, read Common Section , page 29 .
- To avoid undesirable effects, always connect and disconnect pedals while the instrument is switched off.
-
PEDAL FOOT CONTROLLER
[1] and [2] jacks