Viscount Legend '70s Artist Скачать руководство пользователя

Страница: 31 / 146

EN - 29

Legend ‘70s

– User Manual

Modifying a Program

Rotate the data entry dial to modify the parameter value; press the button [

] or [

] to scroll through the

section's parameters.
To leave the submenu and return to the

EDIT PROGRAM

menu, press [EXIT]. Press [EDIT]/[STORE] to return

to the main video page of the Program.

COMMON Section

The

COMMON

menu contains the general parameters of the Program, determining the operation of all the

sections within.
To access the menu, enter the

EDIT PROGRAM

screen (page

) and place the cursor on the

COMMON

field,

then press the data entry dial.

Parameter name

Description

Split Mode

Keyboard operating mode
When

Split Mode

= OFF any sound can be assigned to the whole keyboard or to a part of it. To

assign the sound to a portion of the keyboard, use the

KEY RANGE

function (page

When

Split Mode

= ON the keyboard is split in two. A Sound can be assigned to the Upper or

Lower part. The boundary between the two parts is determined by the

Split Point

parameter,

which sets the highest note of the Lower part.
The Split Mode can also be set through the [SPLIT] button on the main panel.

Values:

OFF, ON

Split Point

The boundary between the Upper and Lower parts, when the Split mode is active.
The Split Point can be set directly through the keyboard, by pressing the [SPLIT] button and the
desired key at the same time.

Values:

between C-1 and G9

FS1 Dest
FS2 Dest
SoftPd/FS1Dest
SostPd/FS2Dest

Function assigned to the pedals connected to the PEDAL ports [FOOT SWITCH 1] (FS1) and
[FOOT SWITCH 2] (FS2), on the rear panel.

Values:



OFF:

no function assigned.



Sostenuto:

Sostenuto effect. Only available for Sounds from the modules SOUND

COLLECTION, A.PIANO and E.Grand of the E.PIANO module). When using this function, only
the notes played while the pedal is pressed are affected by the Sostenuto (soft) effect.



Soft:

Soft effect. Only available for Sounds from the modules SOUND COLLECTION, A.PIANO,

and for the E.Grand sound of the E.PIANO module). When using this function, the Soft effect is
applied to all notes played while the pedal is pressed (i.e. have a slightly lower volume and a
softer, dampened timbre)



FX1 ON:

switch on/off FX1 on the EFFECTS section.



FX1 TAP:

parameter controlled by the [TAP] button for FX1.



FX2 ON:

switch on/off FX2 on the EFFECTS section.



FX2 TAP:

parameter controlled by the [TAP] button for FX2.



REV ON:

switch on/off the effect of the REVERB section.



Module ON:

switch on/off the modules according to the setting of

Foot Switch 1

and

Foot Switch

in the submenu of each module. The function must be enabled for each module with the

parameters

Foot Switch 1 and Foot Switch 2

on each module menu.

The parameter assigned to the [TAP] button button varies according to the currently selected
effect. For further information read

EFFECTS section

, page

When the

Sustain Type

parameter (page

) is set to

Triple

, these fields will appear as

SoftPd/FS1Dest

and

SostPd/FS2Dest

; they assign a function to the left (Soft) and central pedal

(Sostenuto) of the triple pedal connected to the

PEDAL [SUSTAIN]

connector.

FC1 Dest
FC2 Dest
Mod.Wheel Dest

Function assigned to the pedals connected to the PEDAL [FOOT CONTROLLER 1] (FC1) and
[FOOT CONTROLLER 2] (FC2) connector on the rear panel, and function assigned to the
modulation wheel (see

Wheels

, page

Values:



OFF:

no function assigned.



Expression:

continuous control of the volume while playing.



Modulation:

continuous control of the modulation while playing.