Virutex RA17VG, Руководство по эксплуатации, Страница: 10 / 28

10
12. NOISE LEVEL
The noise and vibration levels of this device have been
measured in accordance with European standard EN
60745-2-17 and EN 60745-1 and serve as a basis for com-
parison with other machines with similar applications.
The indicated vibration level has been determined for
the device’s main applications and may be used as an
initial value for evaluating the risk presented by expo-
sure to vibrations. However, vibrations may reach levels
that are quite different from the declared value under
other application conditions, with other tools or with
insufficient maintenance of the electrical device or its
accessories, reaching a much higher value as a result
of the work cycle or the manner in which the electrical
device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations, such
as maintaining both the device and its tools in perfect
condition and organising the duration of work cycles
(such as operating times when the machine is subjected
to loads, and operating times when working with no-load,
in effect, not in use, as reducing the latter may have a
considerable effect upon the overall exposure value).
13. WARRANTY
All of VIRUTEX portable electrical goods are guaranteed
for 12 months from the date of supply, excluding any
damage which is a result of incorrect use or of natural
wear and tear on the machine.
All repairs should be carried out by the official VIRUTEX
technical assistance service.
14. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic was-
te. Recycle equipment, accessories and packaging in ways
that minimise any adverse effect on the environment.
Comply with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products
without prior notice.
F R A N Ç A I S
FRAISEUSE À RAINURES RA17VG
1. INSTRUCTIONS DE SÉCURITÉ POUR LE
MANIEMENT DE LA FRAISEUSE A RAINURES
Lire attentivement la BROCHURE
D'INSTRUCTIONS GÉNÉRALES DE SÉ-
CURITÉ, jointe à la documentation de
la machine.
1. Avant de brancher la machine, s'assurer que la tension
d'alimentation correspond à celle indiquée sur la plaque
des caractéristiques.
2. Maintenir toujours les mains éloignées de la zone de
coupe, et prendre toujours la machine par les poignées.
3. Utiliser toujours des outils d'origine VIRUTEX. Ne
jamais utiliser d'outils défectueux ou en mauvais état.
4. Il est necessaire de travailler avec l'aspiration de
poussière pour éviter que la fraise se casse.
2. CARACTÉRISTIQUES TECHNIQUES
Puissance absorbée..........................................................1000 W
Moteur............................................................................50/60 Hz
Révolutions................................................14000-30000/min
-1
Pince porte-fraise......................................................Ø: 6 mm
Poids machine............................................................1,9 kg
Niveau de pression acoustique
continu équivalent pondéré A..........................................86 dBA
Niveau de puissance acoustique A...................................97 dBA
Incertitude.......................................................................K = 3 dbA
Porter une protection acoustique!
Valeurs totales des vibrations.................................a
h
: <2,5 m/s
2
Incertitude...................................................................K: 1,5 m/s 2
3. ÉQUIPEMENT STANDARD
A l'intérieur de la mallette de transport, vous trouverez
les éléments suivants (Fig. 1):
1.- Fraiseuse à rainures RA17VG avec fraise carbure
aiguisée aux deux pointes.
2.- Guidage 90°.
3.- Guidage droit.
4.- Équerre réversible.
5.- Jauge de profondeur.
6.- Clé o/c: 11 mm pour axe moteur.
7.- Clé o/c: 19 mm pour Écrou fixation pince.
8.- Clé Allen o/c: 3 mm.