_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2018
GW6600 Series User manual
Issue: 1.7
Page 303 of 519
Web Field/UCI/Package Option
Description
Web: Status
Shows the current status of the interface.
Web: Protocol
UCI: network.<if name>.proto
Opt: proto
Protocol type. The interface protocol may be one of the options shown
below. The protocol selected in the previous step will be displayed as
default but can be changed if required.
Select DHCP Client.
Option
Description
Static
Static configuration with fixed address and
netmask.
DHCP Client
Address and netmask are assigned by
DHCP.
Unmanaged
Unspecified
IPv6-in-IPv4
(RFC4213)
Used with tunnel brokers.
IPv6-over-
IPv4
Stateless IPv6 over IPv4 transport.
GRE
Generic Routing Encapsulation protocol
IOT
L2TP
Layer 2 Tunnelling Protocol.
PPP
Point-to-Point protocol
PPPoE
PPP over Ethernet
PPPoATM
PPP over ATM
LTE/UMTS/
GPRS/EV-DO
CDMA, UMTS or GPRS connection using an
AT-style 3G modem.
Web: Hostname to send when
requesting DHCP
UCI: network.<if name>.hostname
Opt: hostname
Defines the hostname to include in DHCP requests
Web: Accept router advertisements
UCI: network.<if name>.accept_ra
Opt: accept_ra
Specifies whether to accept IPv6 Router Advertisements on this
interface (optional).
Note: default is 1 if protocol is set to DHCP, otherwise the setting
defaults to 0.
0
Does not accept IPv6 router advertisements.
1
Accept IPv6 router advertisements.
Web: Send router solicitations
UCI: network.<if name>.send_rs
Opt: send_rs
Specifies whether to send router Solicitations on this interface
(optional).
Note: defaults to 1 for Static protocol, otherwise the setting defaults
to 0.
0
Do not send router solicitations
1
Send router solicitations
Table 109: Information table for general setup configuration settings for DHCP client protocol