13: Configuring an ADSL interface
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2018
GW6600 Series User manual
Issue: 1.7
Page 135 of 519
13.9.3
Create a new PPPoEoA interface
Scroll to the top of the page and click Add new interface….the Create Interface page
appears.
Figure 72: The create interface page
Web Field/UCI/Package Option
Description
Web: Name of the new interface
UCI:
Opt:
Type the name of the new interface.
Allowed characters are A-Z, a-z, 0-9 and _
Web: Protocol of the new interface
UCI: network.[..x..].proto
Opt: proto
Protocol type. Select PPPoE.
Option
Description
Static
Static configuration with fixed address and
netmask.
DHCP Client
Address and netmask are assigned by
DHCP.
Unmanaged
Unspecified
IPv6-in-IPv4
(RFC4213)
IPv4 tunnels that carry IPv6.
IPv6 over
IPv4
IPv6 over IPv4 tunnel.
GRE
Generic Routing Encapsulation.
IOT
L2TP
Layer 2 Tunnelling Protocol.
PPP
Point to Point Protocol.
PPPoE
Point to Point Protocol over Ethernet.
PPPoATM
Point to Point Protocol over ATM.
LTE/UMTS/
GPRS/EV-DO
CDMA, UMTS or GPRS connection using an
AT-style 3G modem.
Web: Cover the following interface
UCI: network.[..x..].ifname
Opt: ifname
Select Custom Interface, and then type nas0.
Table 49: Information table for create a new interface section
Click Submit. The Interfaces page appears.