INSTRUCTION FOR USE
ENGLISH
25
TROUBLESHOOTING
Trouble
Probable causes
Remedy
The motors do not work; no
warning light turns on.
The battery connector is disconnected.
Connect the battery connector.
The batteries are completely discharged.
Charge the batteries.
The 3 battery charge indicators
are flashing simultaneously.
Brush motor overload.
Use less aggressive brushes
Foreign materials (tangled threads, etc.) which may
prevent the brush from rotating.
Clean the brush hub.
The brushes do not work, the
red warning light is on.
The batteries are discharged.
Charge the batteries.
The recovery water vacuuming
is insufficient.
The recovery water tank is full.
Empty the tank.
The hose is disconnected from the squeegee.
Connect.
The vacuum grid is clogged, or the float is
stuck closed.
Clean the grid or check the float.
The squeegee is dirty or the squeegee blades
are worn or damaged.
Clean and check the squeegee.
The tank cover is not properly closed, or the gasket
is damaged, or the Bend tube is clogged.
Close the cover correctly or replace
the gasket or clean the Bend tube.
The recovery water tank is dirty.
Clean.
The solution flow to the brushes
is insufficient.
The solution/clean water filter is dirty.
Clean the filter.
The squeegee leaves marks on
the floor.
There are debris under the squeegee blades.
Remove the debris.
The squeegee blades are worn, chipped or torn.
Replace the blades.
The squeegee has not been adjusted with the knob.
Adjust.
SCRAPPING
Scrap the machine by the qualified waste treatment institution.
Before the machine is scrapped, please take away and segregate below subassembly that relevant laws and regu-
lations request must be disposed in appropriate way.
-
Battery
-
Brush/Pad-holder
-
Plastic hose and plastic parts
-
Electrical and electronic components (*)
(*) Please contact our company service center destroying any electrical and electronic components.
Machine material composition and recyclability
Type
Recyclable per-
centage
AS4325B
weight percentage%
Aluminium
100%
2%
Electric motors-various
29%
23%
Ferrous materials
100%
32%
Wiring harness
80%
1%
Liquids
100%
0%
Plastic-non-recyclable material
0%
1%
Plastic-recyclable material
100%
38%
Rubber
20%
3%
NOTE
Machine with battery charger installed, cannot operate if the charger is not on board. In
case of battery charger malfunction, contact an authorized Service Center.
For further information refer to the Service Manual, available at any Service Center.
Содержание AS4325B
