VIPA IM 306-1LE00, Руководство пользователя, Страница: 46 / 58

Chapter 4 Deployment
Manual VIPA Accessories
4-12 HB37E - IM - RE_306-1LE00 - Rev. 09/28
Here you may define, how the DP slave will behave on failure respectively
on missing a module at the back plane bus.
There are the following setting options:
Software reset, WaitPrm
The DP slave executes a reset and waits for parameter of the master.
Data Ex BASP
The DP slave remains still in Data Exchange and command output disable
(BASP) is activated, this means every output at the backplane bus are
switched to 0.
Data Exchange
The DP slave remains still in Data Exchange mode.
Below the folder "Hex parameter assignment" the parameter data are listed
in hex format.
At DPV1 slave the parameter "DPV1_Status" is listed. This designates the
bytes 0...2 of the parameter telegram, which content is preset by the
system.
Behavior at QVZ
Hex
parameterization
DPV1_Status
(0 to 2)