VIPA 900-2H611, Руководство пользователя

Страница: 21 / 72

Manual VIPA TM
Chapter 2 Hardware description
HB39E - TM - RE_900-2H611 - Rev. 10/16 2-3
Structure
[1] Connector for digital I/O
[2] Connector for DC 12...24V
power supply
[3] Earthing screw
[4] LEDs
[5] Reset button
[6] 4xLAN-RJ45 Ethernet interface
[7] 1xWAN-RJ45 Ethernet interface
[8] RS485 MPI/Profibus DP interface
[9] not connected
2
4
5
6
8
7
3 1
PWR
MPI
DI
USER
MODEM
DO
W
AN/P
P
P
LI
N
E
E
T
HE
RNE
T
2
MP
I
VIPA 900-2H611
E
T
H
E
RNE
T
1
LA
N
1
L
AN3
L
AN4
LA
N
2
LINK/ACT
4 3 2 1
9
WAN
At the front-side of the Teleservice module there are two rows of LEDs.
The following table shows you the usage of the LEDs and the according
colors:
Label Color Meaning
PWR green Power supply is active.
USER green blinks: The TM module is ready for
communication (ca. 20s after PowerOn).
red blinks: IP address not valid (just exist).
red/green blinks alternating: The TM module is just waiting
for an IP address during boot-up.
The LED is also used with the Reset.
More about this may be found at "TM - Reset".
MPI green blinks: The TM module is communicating with
the PLC via MPI.
MODEM green on: The modem of the TM module is active.
DI green on: The digital input of the TM module is "1".
PWR
MPI
DI
USER
MODEM
DO
DO green on: The digital output of the TM module is "1".
TM-H Router VPN
Components
LEDs