VIPA 900-2H611, Руководство пользователя

Страница: 45 / 72

Manual VIPA TM
Chapter 3 Deployment
HB39E - TM - RE_900-2H611 - Rev. 10/16 3-19
TM - Project integration - PG/PC interface via NetPro
For the further approach it is precondition that you have access to the Web
page of the Teleservice module and your CPU is connected to the
Teleservice module via MPI and is accordingly configured (see "TM - PLC
linking").
For the project engineering, a thorough knowledge of the Siemens
SIMATIC manager the hardware configurator and NetPro is required.
IP address and subnet mask of your PC are known.
With the teleservice the Teleservice module works as gateway. As gateway
via the served communication connections you have access to the VIPA
PLC, which is connected via MPI to the TM.
So that the TM can work as gateway, you have to integrate this to your
hardware configuration.
For the deployment of the Teleservice module in the Siemens SIMATIC
manager, the installation of the station file TM-H.cfg is necessary.
This file may be found in the download area at www.vipa.de.
Download this file to your PC. Later this file is to be imported to the PG/PC
interface.
Since in the Teleservice module predefined IP address data for the PPP
server are used, in your project you have to de-activate the automatic
address assignment.
•
Start the Siemens SIMATIC manager with your project. Your project
should contain your CPU, which is connected via MPI to the MPI bus.
•
Open via
Options
> Set
PG/PC interface
the properties dialog.
•
Select the interface parameter assignment "TCP/IP(Auto)...", which
corresponds to your network card and click to [Properties].
•
Select the Register "IE-PG Access" and activate the parameter "Do not
assign IP address automatically".
•
Confirm your setting with [OK].
Precondition
Teleservice
Load TM-H.cfg
station file
De-activate the
automatic
IP address
assignment