VIPA 900-2H611, Руководство пользователя

Страница: 52 / 72

Chapter 3 Deployment
Manual VIPA TM
3-26 HB39E - TM - RE_900-2H611 - Rev. 10/16
Deployment of Tags
For the further approach it is precondition that you have access to the Web
page of the Teleservice module, your PLC may be reached via the TM and
the corresponding
Topics
are configured. The access paths to your PLC
are defined by
Topics
. More about the configuration of
Topics
may be
found at "TM - PLC linking".
A
Tag
is a digital respectively analog value, which is assigned to a data
source. For example the data source could be a flag word of your PLC. To
a Tag you have reading and writing access (configurable). So the directly
assigned data source may be accessed by the Tag.
By presetting of limit values for a Tag, the TM has the possibility for limit
monitoring and appropriate alerting via SMS respectively eMail.
•
Open the Web page of the TM to establish a Tag.
•
Navigate via
Configuration
>
Tag setup
to the page
"Create New Tag....".
•
Here the following parameters may be entered:
Identification
Tag name
: Name with which the Tag is listed. The Tag name
may maximally consist of 64 characters and must
not include the following characters:
space, $ "
Page
: Let the value at "Standard"
Tag description
: Give a comment to the Tag
I/O server setup
Server name
: For VIPA PLCs select "S73&400"
Topic name
: Devices within an I/O server are grouped by
Topic name
.
Enter A, if you have defined your MPI interface
as Topic A, as described at "TM-E - PLC linking".
Address
: Enter a value from your PLC, which is to be
assigned to the Topic (see the following table).
Type
: Here define as Type
boolean
or
analog
depending on the parameter
Address
.
Alarm setup
If you wish an alerting, you may enter limit values here for alert
messages.
Precondition
What is a Tag?
Establishing a Tag