ViOptix Intra.Ox 2.0, Инструкция по эксплуатации

Страница: 21 / 26

Part number:
OXY-2-DUR-IFU-1 Rev A
CONFIDENTIAL
Page 21 of 26
6
Specifications
Component Specification
Tissue Oxygen
Saturation
Range 1 – 99%
Wavelengths 730, 760, 810, 845, 895 nm LED
System Control System will perform self
‐
test when power is turned on
Alarms (visual) Display conditions such as
• Low battery
• Measurement errors
Battery Life 8 hours of continuous use
Operating
Mode Spot Measurement Mode
Operating
Conditions • Device shall operate normally at ambient temperatures of 18°C to
24°C
• Device shall operate normally in a humidity environment of 20% to
80% (non-condensing)
Transport and
Storage • Device (packaged) shall operate normally after storage at -18°C to
60°C
•
Device (packaged) shall operate normally after storage at 10% to
85% (non-condensing).
Dimensions 3 ” x 3 ” x 7 ”
Weight Less than 1 lb.
Sensor
Specifications IEC 60601-1. Any surface of the system that comes into contact with a
patient for a time of 1 minute shall not exceed 41ºC.
The device complies with ANSI/IESNA RP-27.1-15 (Recommended
Practice for Photobiological Safety for Lamps and Lamp Systems
–
General Requirements) for light output.
IPX Rating • Main unit Only (No Battery Pack): IPX2
• Sealed Sheath (with Main unit and battery pack installed): IPX2
• Battery Pack: IPX0